How to Move a Bed: An Easy and Reliable Practical Guide

Introduction

In our lives, moving a bed can definitely be considered a 'high difficulty action'. Occasionally it is due to transferring, occasionally it is because of ornament, and every so often it's only a simple preference to move the mattress from one end of the room to the alternative. As a result, I found out with just one movement that the bed changed into heavier and larger than I had imagined, and it turned into mainly stubborn, like an elephant mendacity in a nook, completely unwilling to transport.
Many of us have had comparable stories: the mattress frame were given stuck within the hallway, the bed couldn't healthy into the elevator, or halfway thru moving, we determined that the wall had been scratched and felt so heartbroken that it exploded. So 'how to move a bed' became a compulsory course.

Don't worry, this article will help you organize your thoughts from beginning to end. We will share some practical preparation techniques, handling methods, and various tips for dealing with unexpected situations. As long as you follow the steps, moving the bed will definitely not be a disaster anymore, but an orderly small project.

Ⅰ. Preparation Before Moving the Bed

To move a bed without overturning, sufficient preparation work must be done. After all, if you don't even know which one is bigger or smaller between the bed and the door, the outcome of moving the bed is likely to be "the bed getting stuck at the door, the person getting stuck at the heart".

1. Measure dimensions to avoid "jamming"

The first thing we need to do is to pick up a tape measure and measure the length, width, and height of the bed, the width of the room door, the corner of the stairs, and the entrance of the elevator. Only in this way can we know if this bed can go out smoothly.

If you find that the elevator is not big enough, you need to plan ahead to take the stairs.

If the corner of the staircase is too small, you need to consider removing the bed.

Don't hold onto a lucky mentality, otherwise when you find the bed stuck at the halfway point of the stairs, you won't have time to cry.

2. Prepare essential tools

Moving a bed is not just about brute force, tools are our good helpers. Common preparations include:

Packaging elements: woven baggage, kraft paper baggage, bubble wrap, adhesive tape.
Defensive system: antique mattress sheets, discarded curtains, may be used to wrap mattresses or bed frames to prevent scratches.
Marking tools: marker pen and small bag, handy for storing screw parts whilst disassembling the bed.

3. Pack the mattress to prevent deformation

Mattresses are most prone to "injury" during transportation. If not handled properly, not only is it easy to get dirty, but it may also collapse and deform. So we need to:

Pack it in a mattress specific storage bag, which can be purchased online.

If there is no storage bag, we can wrap it with thick bed sheets or plastic film.

Maintain even force during transportation, and do not fold or tighten with ropes.

In this way, the mattress can safely move with us to the new home.

Ⅱ. Handling Techniques for Detachable Beds

If our bed is the type that can be disassembled, congratulations, the difficulty of transportation will be greatly reduced.

1. The disassembly sequence should be scientific

We can proceed as follows:

Move the mattress away first and pack it separately.

We will use cardboard containers or luggage to separate the headboard and bed frame for storage. Whilst we arrive at our new domestic, we could effortlessly bring together it by way of reversing the disassembly sequence.
The method of shifting the bed on this manner isn't simplest smooth, but also ensures that the furniture is intact and undamaged.

2. Corner protection cannot be omitted

Wooden and iron beds are most afraid of scratches during transportation, so it is necessary to wrap the corners of the bed with bubble wrap or cardboard and fix them with tape. This way, even if accidentally bumped at a corner, it will not cause too much damage to the bed or wall.

3. Categorize and package for easy reassembly

We will use cardboard containers or luggage to separate the headboard and bed frame for storage. Whilst we arrive at our new domestic, we could effortlessly bring together it by way of reversing the disassembly sequence.
The method of shifting the bed on this manner isn't simplest smooth, but also ensures that the furniture is intact and undamaged.

Ⅲ. Moving a Whole Bed: The Wisdom of Teamfight

Some beds cannot be dismantled, especially some integral iron beds or bunk beds. In such a situation, moving requires a lot of manpower and strength.

Whole beds are often large and bulky, and it's impossible for one person to handle them. At least two to four people are needed to coordinate lifting and landing together. The key is to maintain the balance of the bed and avoid damaging or twisting the waist due to tilting.

2. Prevent scratching the new home

The whole bed is particularly prone to scratching the walls or floor when entering a new home. So we need to:

Wrap thick cardboard or bubble wrap across the corners of the mattress.
Lay a thick cloth or cardboard at the ground to save us scratches.

When turning, someone should be in front to direct and avoid blindly moving.

3. Humorous Reminders

We often say 'move the bed first, move the heart'. If the mentality is unstable and the hand shakes halfway, and the bed hits the foot directly, then the scene is not funny at all. So, when multiple people cooperate, we must shout slogans and work together.

Ⅳ. Special Precautions for Beds Made of Different Materials

1. Solid wood bed

The biggest advantage of a solid wood bed is its solidity, but it is also particularly heavy due to its solidity. When moving, special attention should be paid to:

Never lift it alone.

Prevent collision, otherwise it is easy for the paint to peel off.

It is recommended to remove the headboard during long-distance transportation.

2. Iron bed or bunk bed

Iron beds are usually fixed with screws, so it is best to check for looseness before moving. It is recommended to split the bunk bed into upper and lower parts, otherwise the volume is too large and it is easy to get stuck.

3. Fabric or leather bed

The biggest risk of this type of bed is scratching or getting dirty, so it is necessary to thoroughly wrap it with old bed sheets or large plastic sheets. After moving into a new home, the surface can be wiped clean.

Ⅴ. Mobile Strategy for Mattresses

Mattresses are almost the most delicate presence during the process of moving a bed.

1. Packaging method

Most recommended: Mattress specific storage bag.

Next recommendation: Plastic film+tape sealing.

Homemade plan: Wrap the mattress with old bed sheets or curtains.

2. Precautions for dealing with

Do no longer fold the mattress, otherwise the internal springs or reminiscence foam might also deform easily. People cooperate to boost from both sides and maintain balance.

When carrying stairs, you should walk diagonally from the side to avoid getting stuck.

Ⅵ. Small tricks to improve bed moving efficiency

1. Use sliding tools

We can place furniture slides under the foot of the bed, so that we can easily slide the bed on the floor without having to lift it hard.

2. DIY drag method

If there is no sliding pad, we can lay a thick blanket under the mattress and then drag the blanket. Although it may seem a bit rustic, it is very practical.

3. Please hire a professional moving company

If the budget is sufficient, hiring a professional moving company is actually the easiest and most worry free way. They have experience and tools, much more reliable than us who tinker around blindly.

Ⅶ. The finishing work after moving the bed

1. Check the bed body

After moving into our new home, we need to check if the bed frame is loose and if the screws are secure.

2. Cleaning and organization

All through the transportation manner, it is inevitable that the bed gets dusty. It is high-quality to wipe it once after arriving at the brand new domestic. The card packing containers, tape and other substances used for transferring beds also can be recycled and reused.

3. Reassembly&Placement

The very last step is to reassemble the mattress and region it in the right role. Recall to preserve the bed stage and avoid shaking.

Conclusion

Ultimately, how to move a bed is not an impossible challenge. As long as we put together earlier and choose the proper technique, the bed can be properly and smoothly moved from one location to another.
We want to take into account that moving a bed does not depend on brute pressure, however on skill and coordination. While protecting the bed, we should also protect our waist and hands. After all, a broken bed can be replaced, but a broken waist can be troublesome.

So, next time we're troubled by 'how to move a bed', why not take out this article and review it. I hope it can make us less embarrassed and more relaxed on the way to move!